Phasak PH 9280 Manual De Uso página 69

Operating mode
Bypass mode
Battery test
Fault status
Segurança e harmonia
ININTERRUPTA
Description
When input voltage is within
acceptable range and bypass
is enabled, turn off the UPS
and it will enter Bypass mode.
Alarm beeps every two
minutes.
When UPS is in AC mode or
CVCF mode, press "Test" key
for more than 0.5s. Then the
UPS will beep once and start
"Battery Test". The line
between I/P and inverter icons
will blink to remind users. This
operation is used to check the
battery status.
When UPS has fault
happened, it will display fault
messages in LCD panel.
LCD display
3. Operations
PH 9280 | PH 9290
Uninterruptable Power Supply
EN
68