Audio Settings - JVC KD-AR959BS Manual De Instrucciones

AUDIO SETTINGS

1
Press and hold MENU.
2
Turn the volume knob to make a selection, then press the knob.
Repeat step 2 until the desired item is selected.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
EQ SETTING
EQ PRESET FLAT / HARD ROCK / JAZZ / POP / R&B / TALK / USER1 / USER2 /
VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE: Selects a preset
equalizer.
1 USER1/ USER2: Select a preset name.
EASY EQ
Default: 00 2 Adjust your own sound settings.
(For KD-AR855BT / KD-R850BT)
SUB.W *
1
: –08 to +08/ BASS LVL: –06 to +06/
MID LVL: –06 to +06/ TRE LVL: –06 to +06
(For KD-AR959BS / KD-R950BT)
SUB.W * 1
: –08 to +08/ BASS LVL: –10 to +10/
MID LVL: –10 to +10/ TRE LVL: –10 to +10
PRO EQ 1 USER1/ USER2: Select a preset name.
2 BASS / MIDDLE / TREBLE: Select a sound tone.
(for
3 Adjust the sound elements of the selected sound tone.
KD-AR855BT /
KD-R850BT) BASS Frequency: 60/ 80/ 100/ 200 Hz
Level:
Q:
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz
Level:
Q:
TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 kHz Default: (10.0 kHz)
Level:
Q:
Default: XX
Default: (80 Hz)
–06 to +06 (00)
Q1.0/ Q1.25/ Q1.5/ Q2.0 (Q1.0)
Default: (1.0 kHz)
–06 to +06 (00)
Q0.75/ Q1.0/ Q1.25 (Q1.25)
–06 to +06 (00)
Q FIX (Q FIX)
PRO EQ 1 USER1/ USER2: Select a preset name.
(for 2 BASS / MID BASS / MID / MID HIGH / HIGH: Select a sound tone.
3 Adjust the sound elements of the selected sound tone.
KD-AR959BS /
KD-R950BT) BASS Frequency: 63/ 80/ 100/ 125 Hz
Level:
Q:
MID BASS Frequency: 200/ 250/ 315/ 400 Hz
Level:
Q:
MID Frequency: 630/ 800 Hz/ 1.0/ 1.25 kHz Default: (800 Hz)
Level:
Q:
MID HIGH Frequency: 2.0/ 2.5/ 3.15/ 4.0 kHz
Level:
Q:
HIGH Frequency: 6.3/ 8.0/ 10.0/ 12.5 kHz
Level:
Q:
AUDIO
BASS BOOST +01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at
low volume. ; OFF: Cancels.
SUB.W LEVEL *
1
–08 — +08 (00): Adjusts the subwoofer output level.
SUB.W * 2
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF * 1
THROUGH: All signals are sent to the subwoofer. ; LOW 55Hz / MID 85Hz /
HIGH 120Hz: Audio signals with frequencies lower than 55 Hz/ 85 Hz/
120 Hz are sent to the subwoofer.
* 1
Displayed only when [L/O MODE] is set to [SUB.W] and [SUB.W] is set to
[ON].
* 2
Displayed only when [L/O MODE] is set to [SUB.W].
Default: (80 Hz)
–10 to +10 (00)
Q1.0/ Q1.25/ Q1.5/ Q2.0 (Q1.25)
Default: (250 Hz)
–10 to +10 (00)
Q1.0/ Q1.25/ Q1.5/ Q2.0 (Q1.25)
–10 to +10 (00)
Q0.75/ Q1.0/ Q1.25/ Q2.0 (Q1.0)
Default: (2.5 kHz)
–10 to +10 (00)
Q0.75/ Q1.0/ Q1.25/ Q2.0 (Q1.0)
Default: (8.0 kHz)
–10 to +10 (00)
Q0.75/ Q1.0/ Q1.25/ Q2.0 (Q1.0)
ENGLISH | 19