Operating And Configuring Via App - Abus TVAC19100C Manual De Instrucciones

Mounting options

6. Operating and configuring via app

The TVAC19100 Wi-Fi-enabled Outdoor Security Cameragives you the option of switching to live on the
cameras and to configure the recorder. The app for this device can be found in the App Store under the name
of "App2Cam".
To configure access to the camera, proceed as follows:

" App2Cam " app
Ceiling mounting
Download the "App2Cam" app and install it on your
smartphone.
Make sure that your smartphone or tablet has internet access.
You have two options to connect the camera to the network:
Option 1:
Connect the LAN adapter cable provided to the camera.
Connect the cable to your router in the next step.
Then connect the power supply unit provided.
While the camera is starting up, the two LEDs on the camera
flash.
Begin setting up the camera once the two LEDs are lit up
permanently. This can take about 60 seconds.
Following this you can proceed with the setup at point .
Wall mounting
13
English