Makita GA7050 Manual De Instrucciones página 11

2
3
4
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
–
–
*1 Only for tools with M14 spindle thread.
*2 Do not use Super flange and Ezynut together.
*3 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the special
guard covering the both side of the wheel. Follow the regulations in your country.
*4 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
013353
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model GA7050, GA7050R, GA9050, GA9050R
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
1
6
6
3
7
8 8
5
9
5
Wheel guard for Depressed center grinding wheel / Multi-disc / Wire wheel brush
Depressed center grinding wheel / Multi-disc
Wheel guard for Abrasive cut off wheel / Diamond wheel
Inner flange 78 (Australia and New Zealand only)
Abrasive cut off wheel / Diamond wheel
Outer flange 78 (Australia and New Zealand only)
ENG905-1
): 94 dB (A)
pA
): 105 dB (A)
WA
10
11
12
Side grip
Inner flange / Super flange
*1 *2
Lock nut / Ezynut
Rubber pad
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Lock nut wrench
Dust cover attachment
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model GA7050, GA7050R
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
2
14
13
*1 *2
*3
*4
*4
): 6.5 m/s
h,AG
2
): 4.0 m/s
h,DS
2
ENG900-1
2
2
11