Polar Refrigeration G60 Manual De Instrucciones página 44

Frigoríficos para mostrador de preparados de ensalada / pizzas de acero inoxidable
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
Telephone Helpline: 0845 146 2887 (United Kingdom)
Fit Glass Panels (G623 Only)
Screw the collars to the rim of the appliance.
1.
Note: Ensure the hole in the collar for the grub screw faces inwards.
Slot the two side panels into the collars, with the holes in the glass at the top.
2.
Note: Ensure the screw hole furthest from the edge of the panel
goes to the back of the appliance.
Screw a grub screw into each collar to secure the panels.
3.
Note: Ensure the soft end of the grub screw is the end making
contact with the glass.
Slot the rear panel into the collars, with the holes in the glass at the top.
4.
Screw a grub screw into each collar to secure the panel.
5.
Slot the plastic plugs into each of the holes.
6.
Screw the brackets to the inside of each pane using the bolt assemblies.
7.
Note: Ensure the short end of the bolt assembly is on the outside of the panels.
Place the top panel onto the brackets, ensuring all holes line up.
8.
Insert the plugs and attach the top panel to the brackets with the bolt assemblies (see above).
9.
Operation
Storing Food
To get the best results from your POLAR appliance, follow these instructions:
Only store foodstuffs in the appliance when it has reached the correct operating temperature.
Ensure gastronorm bays are full at all times, even if the gastronorms are unused or empty. Empty bays will greatly reduce efficiency of the appliance.
Do not place uncovered hot food or liquid inside the appliance.
Wrap or cover food where possible.
Do not obstruct the fans inside the appliance.
Avoid opening the doors for prolonged periods of time.
Turn On
Close the door(s) of the appliance.
1.
Ensure the power switch is set to [O] and turn on at the socket.
2.
Switch on the Power [I]. The current temperature within the appliance is displayed.
3.
l
Control Pane
Set the Operating Temperature
Press the
button. The display will flash.
1.
Press the
or
buttons to display the required temperature.
2.
Press the
button to store the temperature.
3.
Manual Defrost
Press and hold the defrost button
Lock/Unlock the Control Panel
To lock the control panel:
Press and hold the UP
and DOWN
1.
Pof flashes on the display and the keyboard is locked.
2.
for 2 seconds to begin a manual defrost. The defrost light illuminates.
buttons simultaneously for 10 seconds.
Bracket
Glass Panel
Bolt Assembly
Plug
Bolt Assembly
UK
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

G623

Tabla de contenido