Storing Food - Polar Refrigeration G60 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)
Attach Refrigerated Counter Top (G623 Only)
Remove the appliance from the packaging.
1.
Tip the appliance back and loosely attach the three brackets to the underside of the counter top, using suitable screws Do not fully tighten at this stage.
2.
Note: Ensure the two 'L' shape brackets are fitted to the outside edges.
Lower the Counter Top unit onto the marble sides. Ensure the side brackets are postponed on the inside of the marble rim.
3.
Push the side brackets flush with the marble and tighten the bracket screws.
4.
Fit Glass Panels (G623 Only)
Screw the collars to the rim of the appliance.
1.
Note: Ensure the hole in the collar for the grub screw faces inwards.
Slot the two side panels into the collars, with the holes in the glass at the top.
2.
Note: Ensure the screw hole furthest from the edge of the panel
goes to the back of the appliance.
Screw a grub screw into each collar to secure the panels.
3.
Note: Ensure the soft end of the grub screw is the end making
contact with the glass.
Slot the rear panel into the collars, with the holes in the glass at the top.
4.
Screw a grub screw into each collar to secure the panel.
5.
Slot the plastic plugs into each of the holes.
6.
Screw the brackets to the inside of each pane using the bolt assemblies.
7.
Note: Ensure the short end of the bolt assembly is on the outside of the panels.
Place the top panel onto the brackets, ensuring all holes line up.
8.
Insert the plugs and attach the top panel to the brackets with the bolt assemblies (see above).
9.
Operation

Storing Food

To get the best results from your POLAR appliance, follow these instructions:
• Only store foodstuffs in the appliance when it has reached the correct operating temperature.
• Ensure gastronorm bays are full at all times, even if the gastronorms are unused or empty. Empty bays will greatly reduce efficiency of the appliance.
• Do not place uncovered hot food or liquid inside the appliance.
• Wrap or cover food where possible.
• Do not obstruct the fans inside the appliance.
• Avoid opening the doors for prolonged periods of time.
Turn On
Close the door(s) of the appliance.
1.
Ensure the power switch is set to [O] and turn on at the socket.
2.
Switch on the Power [I]. The current temperature within the appliance is displayed.
3.
Bracket
Glass Panel
Bolt Assembly
Plug
Bolt Assembly
UK
2