Fermax DUOX PLUS Skyline Manual De Instalador página 43

DUOX PLUS Amplifier Call:
• You can use the buttons with keypads to make direct calls to
specific apartments (professionals).
• 2 simultaneous conversation channels on the same pair.
• The house terminal´s address is encoded with 6 digits (calling
code). The default value is 000000, (this can´t be called from any
street panel).
• Panels with an address «0» in each block allow for communication
with telephones when disconnected if the communication line is
free. Communication is established with the «0» panel of the
block corresponding to the telephone. If you do not want this
feature do not assign this address to any panels.
• A telephone with the address 000000 can not establish
communication upon disconnecting.
• If there are panels in the sub-block, no connection is made upon
disconnection, only with panel 0 of the block.
• A call is made to the home:
- Button Panels: pressing the corresponding button.
- Panels with keypad: Entering the residence number + bell. You
do not need to enter the 6 digits. If a shorter code is entered, it is
filled in with «0» to the left. The letter «A» can be used to delete
the sequence entered.
Pag 43