Internal Units; Art. 5702; Art. 5714Kc - Comelit 8184I Manual Tecnico

Internal units

1
2
9
8
7
Technical characteristics - Colour monitor Art. 5702
1 Call volume adjustment/Privacy function selector (Privacy service
means exclusion of the call from the external unit and from intercom
system door-entry phones or door entry monitors; activation of the
Privacy function is signalled by a red indicator appearing to the side of
the selector).
The user can select the Monitor ringtone as described on page 21.
2 LED indicator (activation according to configuration adopted).
3 Button memo label for indicating button functions.
4 Monitor handset (lift the handset to start communication).
5 Brightness control knob (turn clockwise to increase brightness).
6 Colour intensity adjustment knob (turn clockwise to increase the value).
7 Hooking bracket.
8 Standard front panel, can be customised with customisation kit Art.
5727.
9
16 16

Art. 5702

1
2
3
1
2
4
3
4
5
6
5
6
Description of buttons:
A Key button.
P1 Button available as standard, can be used for various services (C.NO.
contact 1 A max.) depending on system requirements; removing CV3
and CV4 as specified in variant BK/PIC on page 93.
P2 Button available as standard.
P3 P4 Optional buttons (using card Art. 5733 or Art. 5734) for activating
additional functions.
P5 P6 Optional buttons (using card Art. 5733) or optional LED indicators
(using card Art. 5734) available for different functions.
Up to 3 monitors can be used in the same family unit.

Art. 5714KC

7
6
5
4
1 Bracket-Monitor connector.
2 S1 Dip switch for programming user addresses.
3 CN1 Optional card (Art. 5733 or 5734) connector.
4 JP1 Jumper for programming the bracket as Main (M) or Secondary
(S) (see page 21).
5 CV3 CV4 Jumpers for freeing Button 1 (C. NO. contact 24 V- 100 mA
max.).
6 Terminal block for system connection:
+ - Terminals for connection to Art. 1207 or 1212/B.
L L Bus line connection terminals.
CFP CFP Floor door call input.
P1 C1 Contacts for Button 1 used for various purposes.
To have a C.NO. contact (24 V-100 mA max.), remove jumpers CV3
and CV4.
+S -S Terminals for call repetition device.
+LED -LED Input terminals for LED used for various purposes.
7 CV5 Jumper for video closure.
1
2
3