System Initialization - Astralpool Heliox UV MP Serie Manual De Instalación Y Mantenimiento

Click directly on the field to be changed.
Enter the new value on the keyboard that pops up on screen. Once
entered, press "Enter" to finish.
Proceed similarly with the other fields to be modified.
Once set the system date/time, proceed similarly to adjust your "Time
Zone" and "DST" settings for the automatic time change depending
on time of year.
Press "OK" to return to the main application.
To transfer the DATE/TIME parameters introduced in the touchscreen
to the system's CPU, press the validation DATE/TIME key in the
application main screen.
Warning
The other screen settings are set at factory default and should not be modified without the
supervision of an authorized Astralpool technician.

6.4. System initialization

RUN
Press this key to switch on the UV lamp.
WARNING:
In the event of a sudden disconnection of the lamp for any reason (stop, alarm, etc.), the system will not start the lamp
immediately but it will make a controlled re-ignition once the normal operating conditions are restored, thereby preserving its
integrity.
The re-ignition indicator will flash on the bottom of the screen.
Once started the lamp, this icon will appear at the bottom right of the screen.
Gradually, the system will adjust the output power level to reach the setpoint radiation depending on the model installed.
STOP
Press this key to switch off the UV lamp.
18