Specific Functions Of Model Zero - Ascaso BARISTA T Manual De Usuario

ATENCIÓN!
It is possible to activate the machine so that only the keypads and screens are
illuminated, disconnecting the resistors and alarms. To connect the machine in
this way, with the machine off, press keys 1 and 4 of group 1, and keep them
pressed while activating the main switch, until the keypads and screens are illu-
minated. To deactivate, we must repeat the same operation.

14 - Specific functions of model ZERO

The Barista T ZERO model has 4 switches (5 in the e 3 groups version) arranged on
the electronic control board (located under tray 11) by means of which we can control
the following functions:
a. Control of the temperature of the coffee groups, with 8 selections available for each
group.
b. Activation of the demonstration mode, through which we deactivate the resistances
and alarms.
c. Maximum power control by selecting the maximum number of resistors that can
work simultaneously (see power limitation table in section 5 - electrical connection).
d. Activation of the pre-infusion, and time selection of the ON phase of the same (the
OFF phase is always 3s).
e. Activate or deactivate the steam boiler.
The different combinations and the situation of the different switches in the control unit
are the following ones.
21