Domo DO7087S Manual De Instrucciones página 47

www.domo-elektro.be
up. The appliance is now switched on. To turn the
appliance off again, press the on/off button and
hold. The indicators will go out and the appliance
is now switched off.
Temperature indicator
When the iron is heating up, the temperature
indicator will be lit up. When the set temperature
has been reached, the light indicator will go out
again. During ironing the indicator will alternately light up and go out again, as the
iron is being kept at the right temperature.
Steam light (C)
When you turn on the device, the steam light will remain unlit. As soon as the device
has preheated, the steam light will light up blue, indicating you may start ironing.
Steam release button
When the light indicator lights up blue, you can start using steam. Press the steam
release button on the inside of the handle of the iron to spray a continuous steam out
of the soleplate. When you let go of the button, you will iron dry again, without steam.
Descaling cartridges
We advise you in changing the descaling cartridges after 3 months. In order to replace
the descaling cartridge, you need to remove the water tank and remove the old
cartridge and insert a new one in the same place.
Attention: A new descaling cartridge is best left soaking in a small container of water
for an entire night. This ensures it's wet enough to allow you to iron immediately after
changing the cartridges out.
Cord clamp
After use you can easily store the cord and steam hose by using the cord clamp. Pull
out the clamp, lead the steam hose and the cord around the steam generator and push
in the clamp to lock the cord and steam hose.
TEMPERATURE DIAL
Set the right temperature for the right fabric with the temperature dial.
For synthetic fabrics/silk:
For wool:
For cotton:
For linnen:
70<T<120°
100<T<160°
140<T<210°
170<T<225° MAX
47
A
B
DO7087S
C