Panasonic CS-ME9PB4EA Instrucciones De Funcionamiento página 6

How to use
MODE
To select operation mode
AUTO - For your convenience
• During operation mode selection the POWER
indicator blinks.
• Unit selects operation mode every 3 hours
according to setting temperature, outdoor
temperature and room temperature.
HEAT - To enjoy warm air
• Unit takes a while to warm up. The POWER
indicator blinks during this operation.
COOL - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
To reach temperature quickly
POWERFUL
• Press the button again or
turn OFF the unit to stop this
POWERFUL
operation.
To enjoy quiet operation
QUIET
• This operation reduces airfl ow
noise.
QUIET
Can be activated in all modes and can be
cancelled by pressing the respective button again.
Auto OFF/ON button
POWER (Green)
TIMER (Orange)
POWERFUL (Orange)
QUIET (Orange)
AUTO
AIR SWING (Orange)
6
Use when remote control is a malfunction occurs.
1. Press the button once to use in AUTO mode.
2. Press and hold the button until you hear 1 beep, then release to use in forced
COOL mode.
3. Repeat step 2. Press and hold the button until you hear 2 beeps, then release
to use in normal COOL mode.
4. Repeat step 3. Press and hold the button until you hear 3 beeps, then release
to use in forced HEAT mode.
• Press the button again to turn off.
Control Panel
Remote control
display
AUTO
FAN
SPEED
HEAT
COOL
DRY
OFF ON
TIMER TIMER
OFF/ON OFF/ON
MODE FAN SPEED
POWERFUL AUTO
TEMP TEMP
AIR SWING
QUIET
MANUAL
TIMER TIMER
ON ON SET SET
1 1 3 3
2 2
OFF OFF CANCEL CANCEL
CHECK CHECK CLOCK RESET
Remote control
receiver
POWER (Green)
TIMER (Orange)
POWERFUL (Orange)
QUIET (Orange)
AUTO
AIR SWING (Orange)
Press and hold for
approximately 10
seconds to show
12-hour (am/pm) or 24-
hour time indication.
Press to restore the
remote control to
default setting.