Troubleshooting; Accessories Included With Saw; State-Of-The-Art Features Of This Saw - QEP 60083 Manual De Operación

TROUBLESHOOTING

OVERHEATING OF SAW:
A. Turn saw off and let it rest until motor is cool to the touch.
B. Check and clean the ventilation slots, removing blockage and dirt.
THE SAW DOES NOT START:
A. Check that power cord is properly plugged in.
B. No power from outlet.
C. Switch is damaged.

ACCESSORIES INCLUDED WITH SAW

• 7" (180mm) Continuous Rim Diamond Blade
• Laser Cutting Guide
• Universal Blade Wrench

STATE-OF-THE-ART FEATURES OF THIS SAW

• Adjustable cutting table allows for precision angle cuts
• Direct drive, 1 HP motor
• Wet cutting
• Water reservoir completely separated from all electrical components.
• Table channels water back into the reservoir reducing the refilling of water.
• Stainless Steel Locking Rip Guide
• Angle Cutting Guide
- 8 -