Troubleshooting; Parts List - QEP 22500Q Instrucciones De Funcionamiento

5. DO NOT force the material into the blade. let
the blade cut at its own speed.
6. DO NOT cut material not recommended by
the blade manufacturer.

TROUBLESHOOTING

OVerHeatinG OF SaW:
1. Turn saw off and let it rest until motor is cool
to the touch.
2. Check and clean the ventilation slots,
removing blockage and dirt.
tHe SaW dOeS nOt Start:
1. Check that power cord is properly
plugged in.
2. No power from outlet.
3. Switch is damaged.

PARTS LIST

See exploded parts diagram on page 10.
PART #
22500-1
22500-2
22500-3
22500-4
22500-5
22500-6
22500-7
22500-8
6-7003Q (9)
22500-10
22500-11
22500-12
22500-13
22500-14
22500-15
22500-16
22500-17
22500-18
22500-19
22500-20
22500-21
– 9 –
DESCRIPTION
Blade Guard Set (w/ Screw,
Wing Nut, Washer & Guard
Support)
Miter Guide Set (w/
Adjustment Knob & Hex Nut)
Rip Guide
left Cutting Table
Right Cutting Table
Upper Frame
Blade lock Nut
Outer Flange
7 in Continuous Rim Blade
Inner Flange
Oil Seal for Motor
Motor (w/5 Screws)
Capacitor (w/Screw)
Main Frame (w/6 Screws)
Waterproof Switch (w/
Waterproof Rubber Cover)
Carrying Handle
Rubber Base (4)
Power Cord
Strain Relief Bushing
Power Cord Shelter
Universal Wrench