Schneider Airsystems UNM 580-15-90 DX Manual De Instrucciones Original página 7

Table of contents - Part 1
1.1 Scope of delivery ......................
1.2 Conventional use ......................
1.3 Technical data ..........................
1.4 Components.............................
1.5 Vessel inspections .....................
1.1 Scope of delivery
– Compressor with instruction manual
– Documents accompanying compressed air
vessel
1.2 Conventional use
The compressor is designed for generating
and storing compressed air only. Com-
pressed air is only suitable for compressed
air tools/devices/machines.
Any other type of use is considered contrary
to the intended use.
The compressor must not be used in poten-
tially explosive areas. Combustible, caustic
or toxic gases must not be sucked in!
1.3 Technical data
see Figs. 1a, 1b
1.4 Components
01 Compressor unit
02 Intake filter
03 Oil filler plug
04 Oil drain screw
05 Oil inspection glass
06 Pressure pipe
07 Check valve
08 Vessel
09 Condensate drain valve
1
10 Pressure switch with ON/OFF switch
1
11 Safety valve
1
12 Pressure gauge (vessel pressure)
1
13 Pressure gauge (working pressure)
1
14 Electric motor
16 V-belt
17 Belt guard grating
18 Filter pressure reducer (FDM)
19 Safety quick-release coupling (cleaned,
controlled compressed air)
20 Mist oiler
21 Safety quick-release coupling (air con-
taining atomised oil)
38 Guide roller with locking brake
1.5 Vessel inspections
An informal inspection book (collection of all
documents related to the vessel including in-
spection documents from the "approved test
centre") must be compiled for the vessel.
Register the vessel with an "approved test
centre", stating this data. The centre initiates
and certifies an installation check by an
authorised expert and specifies the inter-
vals for repeat inspections.
It is essential to retain vessel documents
included in the delivery (= certification
documents) and inspection documents for
the entire service life of the vessel. The
statutory specified inspections must be
arranged in accordance with the applica-
ble regulations of the respective country
in which the vessel is used.
UNM 580-15-90 DX
GB
I/1