Svan SVH385X Manual De Usuario página 62

supply for a long period of time.
Adjusting the Cooking Time
The cooking time can be adjusted during
"WAIT" mode or during "OPERATING"
mode.
Adjusting the Minute Minder " "
Touch the MODE " " sensor until the
Minute Minder symbol illuminates on the
Time display and "00:00" appears. Adjust
the desired time period for the warning
signal using the PLUS "
sensor buttons while the symbol is flashing.
When you have completed the adjustment,
do not press any buttons for a few seconds,
then the Minute Minder timer will be set.
When the timer reaches zero, an audible
warning will sound, and the Minute Minder
symbol and "00:00" will flash on the
Time display. Press any button to stop
the audible warning and the symbol will
disappear.
Adjusting the Cooking Duration Time
This function helps you to cook for a fixed
period of time. Prepare the food for cooking
and put it in the oven. Then, select the
desired cooking function and
the temperature. Touch the MODE " "
sensor button until you see the Duration
Time symbol " " on the Time display. Set
the required cooking period using the PLUS
" and MINUS " " sensors while the timer
"
is in this position. When you have
completed the adjustment, wait until the
current time of day is displayed and the
Duration Time symbol remains illuminated.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the Duration Time symbol will flash on
the Time display. Touch any sensor on the
control unit to end the sound.
Adjusting the Cooking End Time
This function is used to begin cooking after
a certain period of time and for a specific
duration of time. Prepare the food for
cooking and put it in the oven. Then,
select the desired cooking function and the
temperature.
Touch the MODE " " button until you see
the Cooking Duration Time symbol on the
Time display. Set the required cooking
period using the PLUS "
sensor while the timer is in this position.
When you have completed the adjustment,
wait until the current time of day is
displayed and until the Cooking Duration
" and MINUS " "
" and MINUS " "
EN - 17
Time symbol remains illuminated.
Then, touch the MODE " " sensor button
until you see the Cooking End Time symbol
on the Time display. The time of day and
the Cooking Duration Time symbol will
flash. Set the required finish time using the
PLUS " " and MINUS " " sensors while
the timer is in this position. When you have
completed the adjustment, wait until the
current time of day is displayed and until
the Cooking End Time symbol "
remains illuminated.
The oven will calculate the operating time
by deducting the cooking period from
the set finishing time, at which it will stop
operating. The timer will give an audible
warning and the Cooking End Time symbol
will flash. Touching any button on the timer
will end the audible warning.
Digital Timer Sound Adjustment
To alter the warning signal sound, while the
Time display shows the time of day, press
and hold the THERMOSTAT " " sensor
button for 3 seconds until there is an
audible signal sound. After this, each time
the MINUS " " OR PLUS "
pressed, a different signal will sound. There
are four different types of signal sound.
Select the desired sound and do not press
any other buttons. After a short time, the
selected signal sound will be saved.
Boost Function
This function is used to shorten the
preheating time. The BOOST " " sensor
will illuminate when the Turbo, Fan, Static
or Pizza functions are selected. To save
preheating time, touch the BOOST " "
sensor button before starting a cooking
operation. Use this function to heat the
oven to the desired temperature as quickly
as possible. This mode is not appropriate
for cooking.
After using the boost function, the oven can
be used for cooking.
Key Lock Function
The key lock is used to avoid unintentional
changes to oven settings.
To activate the key lock, touch the KEY
LOCK " " sensor button for 2 seconds until
you see Key Lock symbol on the display. To
deactivate the key lock, touch the KEY
LOCK " " sensor for 2 seconds until the
key lock symbol disappears from the
display.
When the key lock is engaged, only the ON/
OFF " " sensor button can be activated. All
"
" sensor is