Vermeiren Carpo Limo Manual De Instrucciones página 23

4. Check that the seat is firmly secured.
Depth adjustment (Fig. A)
1. Pull the seat depth adjustment lever  upwards.
2. Move the seat  forward or backward over the seat depth rails .
3. To lock the seat in place, let go of the lever  once the seat  has reached the desired position.
4. Swivel the seat a little until it locks in position.
5. Check the seat is locked securely.
Fig. A
Seat height adjustment (Fig. B)
The seat can be adjusted in 4 different seat heights (increments: 25 mm).
1. Remove the seat .
2. Loosen the screw  a little bit.
3. Remove the safety pin 
4. Move the adjustment bar  upwards/downwards in the receiver , and place these in a
comfortable seat height.
5. Replace the safety pin .
6. Replace the seat .
7. Fasten the screw  and check that the play of the seat is reduced.
8. Check the seat is locked securely.
Fig. B
.
Page 21
1 = Seat lever
2 = Seat
3 = Seat depth adjustment lever
4 = Seat depth rails
5 = Adjustment bar
Carpo Limo
2015-07