Initial Start-Up - HSM Pure 740 Instrucciones De Servicio

4 Initial start-up

WARNING
Dangerous mains
voltage!
Improper handling of the machine can lead
to an electric shock.
– Only use the machine in a dry room
indoors. Never operate the machine in
damp rooms or in the rain.
– Keep the machine, the plug and cable
away from open fi re and hot surfaces.
The ventilation slots must not be blocked
or covered and there must be at least
5 cm space between the shredder and
any wall or furniture.
– Make sure that the power plug is easily
accessible.
– Before you insert the power plug, make
sure that the voltage and frequency
of your power supply comply with the
information on the name plate.
• Connect the power cable provided to the
back of the document shredder and plug
the power supply into a properly installed
socket.
12
5 Operation
Switching on the shredder
• Set mains switch at rear of paper shredder
to "I".
• Press the operation button.
 The "Ready for operation" indicator
lights up.
Shredding paper
• Feed the paper into the centre of the
paper slot. The light barrier starts the
cutting unit automatically. Therefore, with
thin paper strips, make sure the light bar-
rier detects them.
 Three seconds after the light barrier in
the paper feed opening is free again, the
cutting unit is switched off automatically
and the shredder switches to standby.
HSM Pure 740
english
05/2015