Initial Start-Up - HSM Pure 220 Manual De Instrucciones

5 Initial start-up

WARNING
Dangerous mains
voltage!
Improper handling of the machine can lead
to an electric shock.
– Only use the machine in a dry room
indoors. Never operate the machine in
damp rooms or in the rain.
– Keep the machine, the plug and cable
away from open fi re and hot surfaces.
The ventilation slots must not be blocked
or covered and there must be at least
5 cm space between the shredder and
any wall or furniture.
– Make sure that the power plug is easily
accessible.
– Before you insert the power plug, make
sure that the voltage and frequency
of your power supply comply with the
information on the name plate.
• Connect the power cable provided to the
back of the document shredder and plug
the power supply into a properly installed
socket.
10
6 Operation
Switching on the shredder
• Set mains switch at rear of paper shred-
der to „I".
Shredding paper
• Feed the paper into the centre of the
paper slot. Automatic start stop control
starts the cutting system automatically.
 When the paper fee ding opening is free
again, the cut ting sy stem au to ma tical ly
swit ches off af ter app rox. 3 sec.
Shredding credit cards and store
cards
• Put the cards into the infeed slot so they
can be detected by the start/stop system.
Please consider the environment and dis-
pose of different materials separately.
Switching off the shredder
• Set mains switch at rear of paper shred-
der to „0".
HSM Pure 220
english
05/2015