Button Function - SPORTSTECH RSX400 Manual De Instrucciones

RPM Rowings per minute
Displays the current rowing speed in rowings per minute. This value becomes permanent
updated.
COUNT
The number of rowing strokes is displayed continously from the start of training.
DIST Distance
• W/O setting the target value, distance will count up.
• With setting the target value, distance will count down from your target distance to 0, and as 0 is
achieved distance alarm.
• Range 0.0~999.9 KM
PULSE
• With pulse signal into for 6 seconds, the current pulse will display.
• W/O pulse signal into for 6 seconds, it displays "P".
• Pulse alarm when over preset target pulse.
• Range 0-40~230 BPM
RESET
• In setting condition, press RESET key once to reset the current function figures.
• Press RESET key and hold for 2 seconds to reset all function figures, and have Bi sound for prompt
at the same time.
MODE Modus
• Choose each function by pressing MODE key. In SCAN mode, press MODE key can lock the
current function.
• Press MODE key and hold for 2 seconds to reset all function figures.
SET
• Each adding by pressing once, press and hold the button to increase the value faster
• TMR setting range: 0:00~99:00 (Each increment is 1:00)
• CAL setting range: 0~9990 (Each increment is 10)
• DST setting range: 0.0~999.0 (Each increment is 1.0) KM

7. BUTTON FUNCTION

46