UFESA TW1100 Manual De Instrucciones página 13

To assemble it, refer to Fig.1: positioning first the base1 (C) then the base 2 (D) on the body, making
sure to lock with 4 screws supplied (E).
REMINDING (Fig.2): there are 2 corresponding holes at the base, the 2 pillars at the seat need to pass
through these 2 holes when assembly the base onto the fans.
USE
Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the power
cord is damaged, it must be replaced by the manufacturer or a competent qualified electrician or a
person with similar qualifications, in order to avoid any risk.
Timer: This appliance has a timer for automatic switching off at the end of the time set; to set the time
turn the timer knob (A) clockwise to the position corresponding to the desired operating time (0-120
min.); in order to operate the appliance in a continuous manner, and to therefore exclude use of the
timer, turn the knob anticlockwise to the "ON" position.
Operation:
After setting the timer
- To switch the appliance on, rotate the speed switch knob (B)
- 0 = Off 1 = Speed minimum
= Speed minimum+oscillating,
= Speed maximum+ oscillating
To switch off the appliance, turn the speed switch knob(B) to the "0" position or turn the timer knob(A)
to the "OFF" position, and then remove the plug from the socket.
When not in use for long periods, the plug must always be removed from the socket.
CLEANING AND MAINTENANCE
Warning: before carrying out regular cleaning operations, disconnect the plug from the mains socket.
• To clean the appliance, use a soft, slightly damp cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or any other liquid: if this should happen, under no
circumstances should hands be put into the liquid; first disconnect the plug from the mains socket.
Then dry the appliance carefully and check that all the electrical parts are dry: if in doubt, check with
professional qualified technician.
• It is essential that the motor ventilation holes are free of dust and fibres.
• In case of long periods of non-use store the fan, protecting it from dust and moisture; we recom-
mend using the original packaging.
2 = Speed medium 3 = Speed maximum
= Speed medium+ oscillating
13