Monitor Test - NAMCO GUNMEN WARS Manual Del Operador

6-3-4 Monitor Test

1. Select "MONITOR TEST" on the menu screen to test and adjust the
Monitor. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press
the Enter button. To return to the Monitor Test Menu from a test pattern
press the Enter button.
3. Select "EXIT" and press the Enter button to return to the menu screen.
GRADATION PATTERN
CROSSHATCH PATTERN (CRT)
CROSSHATCH PATTERN (PROJ)
WHITE WINDOW (H)
WHITE WINDOW (M)
WHITE WINDOW (L)
INTERLACE PATTERN
VIEW ANGLE ADJUST (CRT)
VIEW ANGLE ADJUST (PROJ)
FULL WHITE
EXIT
UP/DOWN : SELECT
Note: Items (c) and (i) are not used on this game.
(a) Displays vertical colour bars.
(b) Displays a crosshatch pattern for CRT monitors.
(c) Displays a crosshatch pattern for projection monitors (not used on this
game).
(d) Displays a white square (bright).
(e) Displays a white square (medium)
(f) Displays a white square (dim)
(g) Displays an interlaced pattern.
(h) Displays a pattern for height/width adjustment for CRT monitors.
(i) Displays a pattern for height/width adjustment for projection monitors (not
used on this game).
(j) Outputs white to the full screen area.
MONITOR TEST
ENTER SW : ENTER
Page 53
..................................... (a)
..................................... (b)
..................................... (c)
..................................... (d)
..................................... (e)
..................................... (f)
..................................... (g)
..................................... (h)
..................................... (i)
..................................... (j)