Initialization - NAMCO GUNMEN WARS Manual Del Operador

7. INITIALIZATION

Adjustments when Replacing Parts
The following operation must always be performed after replacing the Game
PCB, Rom, or Control Potentiometers.
The game will not operate correctly if these adjustments are not made.
1. Slide the TEST switch ON while pressing the SERVICE switch . The
following screen is displayed.
3. Ensure that the gun is completely central of all travel and then press
the service button to reset all values.
4. Slide the Test switch OFF to return to normal game mode.
GUN INITIALIZE
AIM AT CENTER OF THE CROSS
AND PUSH SERVICE BUTTON
GUN YAWING
SLIDE
LEFT
0000
TRIGGER : ADJUST SLIDE AND SIGHT
ENTER SW : ENTER
Page 56
FORWARD
0000
RIGHT
0000
BACK
0000