Work Area Safety; Electrical Safety; Personal Safety - Genesis GLID12B Manual Del Operario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.

WORK AREA SAFETY

Keep your work area clean and well lit.
Do not operate power tools in explosive atmospheres,
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet
adaptor plugs in any earthed (grounded) power tools. Double insulated tools are equipped with a polarized
plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized
outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded
power cord and grounded power supply system.
Do not expose power tools to rain or wet conditions
increase the risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators
grounded.
Do not abuse the cord
cord away from heat, oil, sharp edges or moving parts. Damaged cords increase the risk of electric shock.
When operating a power tool outside, use an extension cord suitable for
outdoor use
. These cords are rated for outdoor use and reduce the risk of electric shock.
Do not use AC only rated tools with a DC power supply
work. The electrical components of the AC rated tool are likely to fail and rate a hazard to the operator.

PERSONAL SAFETY

Stay alert
, watch what you are doing and use common sense when operating a power tool. Do not use
tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating
power tools may result in serious personal injury.
Use safety equipment
safety shoes, hard hat, or hearing protection for appropriate conditions will reduce personal injuries.
Dress properly
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air vents may cover moving
parts and should be avoided.
Avoid accidental starting
tool with your finger on the switch or plugging in power tools that have the switch on invites accidents.
Remove any adjusting keys or wrenches before turning the power tool on
wrench or key that is left attached to a rotating part of the tool may result in personal injury.
Do not overreach
in an unexpected situation.
If devices are provided for connection of dust extraction and collection
facilities, ensure these are connected and properly used
reduce dust related hazards.
Do not use a ladder or unstable support
control
of the tool in unexpected situations.
Read and understand all warnings, cautions and operating
SAVE THESE INSTRUCTIONS
. Never use the cord for carrying, pulling or unplugging the power tool. Keep
. Always wear eye protection. Safety equipment such as dust mask, non-skid
. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
. Ensure the switch is in the off position before plugging in. Carrying power
. Maintain proper footing and balance at all times. Loss of balance can cause an injury
Cluttered benches and dark areas invite accidents.
. Never modify the plug in any way. Do not use any
. There is an increased risk of electric shock if your body is
. Stable footing on a solid surface
such as in the presence of
. Water entering a power tool will
. While the tool may appear to
. Use of these devices can
enables better
. A
3

Publicidad

Tabla de contenido
loading

Tabla de contenido