Setting The Temperature; Setting The Spin Speed; Setting The Options - AEG LAVAMAT 82470 BI Manual De Instrucciones

This is the maximum level for the quantity of liquid additives.
Always obey the instructions that you find on the packaging of the deter-
gent products.
SETTING THE PROGRAMME
(KNOB 1 )
Turn the programme selector dial to the
required programme.
The programme dial determines the type
of washing cycle (e.g. water level, drum
movement, number of rinses) and the
washing temperature according to the
type of laundry.
The pilot light of button 8 starts blinking.
The programme dial can be turned either
clockwise or anticlockwise.
= Reset programme / switching OFF
of the machine
If you turn the programme dial to
another programme when the ap-
pliance is working, the yellow pilot
light of button 8 blinks 3 times.
The display shows the message
Err to indicate a wrong selection.
The machine will not perform the
new set programme.

SETTING THE TEMPERATURE

(BUTTON 2)
When setting a programme, the
appliance automatically proposes
the default temperature provided
for that programme.
Press the button 2 repeatedly to increase
or decrease the temperature, if you want
your laundry to be washed at a different
temperature.
The cold wash is indicated with - - and the
symbol .
For the maximum and the mini-
mum available wash water tem-
perature, see «Washing pro-
grammes».

SETTING THE SPIN SPEED

(BUTTON 3)
When setting a programme, the
appliance automatically proposes
the maximum spin speed provi-
ded for that programme.
Press the button 3 repeatedly to change
the spin speed.
RINSE HOLD
If setting this option the water of the last
rinse is not emptied out to prevent the
fabrics from creasing. At the end of the
programme, and the symbol
on the display, the symbol
lit, the light of button 8 goes off and the
door is blocked to indicate that the water
must be emptied out.
NIGHT CYCLE
If setting this option, the appliance does
not drain the water of the last rinse and
the laundry is not wrinkled. All spinning
phases are suppressed so the washing
programme becomes noiseless and it can
be set in the night or during the cheapest
power rate hours. In some programmes
the rinses are performed with more water.
At the end of the programme,
symbol appear on the display, the
symbol remains lit, the light of but-
ton 8 goes off and the door is blocked to
indicate that the water must be emptied
out.
To empty out the water, please read
chapter «At the end of the pro-
gramme».

SETTING THE OPTIONS

(BUTTON 4)
Depending on the programme, different
functions can be combined.
Not all the options are compatible
among themselves. The symbols
of the incompatible options dis-
appear.
Anyway, if an option, which is not
compatible with the set washing
programme or any other option, is
selected, the Err message is dis-
played for few seconds and the
yellow pilot of button 8 light starts
blinking.
Set the options after you have set the pro-
gramme but before pressing the button
ENGLISH
15
appear
remains
and the