Cleaning The Appliance Interior; Cleaning The Fittings; Care Instructions For Stainless Steel Surfaces; Odors - Thermador T36IT902NP Manual De Uso Y Cuidado

en-us Odors

Cleaning the appliance interior

Proceed as follows:
Press the main On/Off switch.
1.
Take out food and store in a cool location.
2.
Place ice pack (if available) on the food.
Clean the appliance with a soft cloth, lukewarm
3.
water and a little pH-neutral washing-up liquid.
9
CAUTION
The rinsing water must not run into the light
or through the drainage hole into the
evaporation area.
Wipe door seal with clear water and dry
4.
thoroughly with a cloth.
Switch appliance back on and put in food.
5.

Cleaning the fittings

To clean, take the variable parts out of the
appliance.
~ "Equipment" on page 10
Care instructions for stainless steel
surfaces
When taking care of and cleaning stainless steel
surfaces, use only cleaning agents suitable for
stainless steel and a stainless steel cleaning cloth.
You can purchase a suitable stainless steel cleaning
cloth from customer service.
To prevent visible scratches, clean the stainless
steel surface in the direction of the structure.
lOdors
I f you experience unpleasant odors:
O d o r s
Switch off the appliance with the main On/Off
1.
switch.
Take all food out of the appliance.
2.
Clean the inside.
3.
~ "Cleaning" on page 23
Clean all packaging.
4.
Seal strong-smelling food in order to prevent
5.
odors from forming.
Switch the appliance on again.
6.
Store food in the appliance.
7.
Check whether the formation of odors is still
8.
occurring after 24 hours.
Change the odor filter.
9.
~ "Changing the odor filter" on page 24
24

Changing the odor filter

Replacement filters are available from your customer
service.
Open the filter holder with a slotted screwdriver.
1.
Remove the used odor filter and replace with a
2.
new odor filter.
Close the filter holder.
3.