Connecting The Refrigerator To The Home Connect App; Installing Updates For The Home Connect Software; Customer Service Access; Deleting Network Settings - Thermador T36IT902NP Manual De Uso Y Cuidado

en-us Home Connect
Connecting the refrigerator to the
Home Connect app
Use this menu to connect your refrigerator to mobile
terminal devices.
Install the Home Connect app on your mobile
1.
terminal device and log in or register.
Open the Home network menu on your
2.
refrigerator.
Press ) button to move to the menu item Connect
3.
to app.
Press : button to open the menu item.
4.
Confirm the prompt to display the refrigerator in
5.
the app.
Open the app and wait until the refrigerator is
6.
displayed.
Press Add to confirm the connection between the
app and the refrigerator.
If the refrigerator is not automatically displayed,
click on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
Follow the instructions in the app until the
7.
process is complete.
Installing updates for the Home
Connect software
The refrigerator checks at regular intervals whether
updates are available for the Home
Connect software.
The Info @ button is visible when an update is
available.
Installing the update:
Press @ button.
1.
A note window with the necessary steps for
installing the new software appears.
Press 8 button to close the note.
2.
Open the Home network menu on your
3.
refrigerator.
Press ) button to move to the menu
4.
item Software update.
Press : button to open the menu item.
5.
The : button is only visible if an update is
Note:
available.
The software is installed.
A note appears when installation is complete.
6.
Press 8 button to close the note.
7.
20

Customer Service access

If you contact Customer Service, they can access
your appliance and view its status after you have
given your consent. You need to have your
appliance connected to your home network for this.
Further information about Customer Service access
and its availability in your country is available under
www.home-connect.com in the Help & Support area.
Contact Customer Service.
1.
~ "Customer service" on page 28
Confirm the start of Customer Service access in
2.
the app.
During Customer Service access the symbol F
appears on the control panel.
As soon as Customer Service has obtained the
3.
necessary data, they end access.
You can interrupt remote diagnosis early by
Note:
switching off Customer Service access in the Home
Connect app.

Deleting network settings

If there is a problem when trying to establish a
connection, or if you would like to register the
appliance in a different home WLAN network (Wi-Fi),
the Home Connect settings can be reset.
Open the Home network menu on your
1.
refrigerator.
Press ) button to move to the menu item Delete
2.
network settings.
Press : button to open the menu item.
3.
Confirm the prompt to delete the network
4.
settings.
To then reconnect the appliance to the home WLAN
network (Wi-Fi), perform initial setup again.
~ "Setting up the connection to the home network"
on page 19
Switch on or off the connection to the
home WLAN network (Wi-Fi)
Open the WiFi menu on your refrigerator.
1.
~ "Open WiFi menu" on page 19
The first time you open the menu, you will be
Note:
automatically guided through initial setup. Follow the
instructions on the control panel.
To open the menu item, press
2.
Connection : button.
Use ( ) buttons to select the required setting.
3.
To select the setting, press 8 button.
4.
Note: If you switch off the Home Connect
connection, you will no longer be able to operate the
appliance with your mobile device.