Miche SUPERTYPE 338TDX Manual De Uso página 8

• Screw the nipples with the relative washer. To avoid the tor-
sion effect, hold the spoke.
To solidify the coupling between spoke and nipple, use a me-
dium thread braking.
• Insert the pin (C) and tighten the spoke (B) with the 17mm
wrench (N) at the torque of 15Nm (Fig. 3)
If necessary adjust the hub by working on the ring (H) (Pic. 2):
• Unlock the grub screw (I) with a allen wrentch 2mm (L) (Pic.
2).
• Turn the ring in clock sense to drop the sliding, and in anti-
clock sense to rise the sliding
• Lock the grub screw (I).
• Check the sliding of the wheel.
Please check that the hub is correctly tightened and closed,
failure to do so could lead to a serious or fatal accident.
REAR HUB
To replace a spoke is extremely easy (Pic. 8)
• Unscrew the spoke from the nipples with the corresponding
spanner.
• Once it has been unscrewed, slide off the spoke from its own
seat.
• Insert the new spoke
• Screw nipple with washer
Draw the spoke to be used for the replacement in the thread-
locker you chose to improve sealing.
To ensure the correct spoke tension please follow the indi-
cations below:
• Correct spoke tension for front wheel (disc side) 1100N
• Correct spoke tension for rear wheel, free wheel side
1300N
To evaluate the correct wheel tension, please use a profes-
sional spoke tension gauge, we do not recommend that spoke
tension is estimated manually; please refer to a professional
cycle mechanic if you do not own a professional spoke tension
gauge. The correct spoke tension is essential to ensure a rid-
ged and durable wheelset.
ATTENTION in correct spoke tension, too high or too low,
could lead to wheel failure and resulting serious or fatal
accident.
8 SUPERTYPE 338TDX / MICHE.IT
COMPLETE WHEELS
4
Supertype 338 TDX wheels are designed to fit to fit tubular
tyre. Miche wheels are designs for use solely on the road or
dedicated cycle track with a smooth surface. Please ensure
that the wheels are not subject to direct shock from poor road
surfaces [i.e. pot holes]. ATTENTION direct shock to the whe-
els from poor road surfaces could lead to wheel failure and
resulting serious or fatal accident. In the event your wheels
are subject to any such shocks from poor road surfaces, yet
do show the signs of any damage we advise you to immedia-
tely have the wheels checked by a qualified mechanic or other
qualified person.