Maintenance; Notes For Maintenance Technicians; Scheduled Maintenance - Aprimatic RSK24 SMT Manual De Instrucciones

7.1 NOTE FOR INSTALLER AND MAINTENANCE
TECHNICIAN
Compliance with Machinery Directive 89/392/EC. When
you have installed the equipment, you must complete a
Declaration of Conformity and a Scheduled Maintenance Plan
in compliance with the directive and then hand over copies
of these documents to the user.
7.2 SCHEDULE MAINTENANCE
You should ask the company that installs the automation to
provide a scheduled maintenance plan in compliance with
the regulations for this type of equipment.
Batteries are consumables and as such are not covered by
the guarantee.
Do not throw away old batteries with household waste.
Dispose of old batteries using the old battery containers
provided at sales outlets.
The maintenance operations recommended by Aprimatic
S.p.A. for the electrical equipment is listed in Tab. 4.
SPACE RESERVED FOR INSTALLER
PLEASE GIVE A COPY OF THIS PAGE TO THE USER
Aprimatic S.p.A.
Via Leonardo da Vinci, 414
40059 Villafontana di Medicina – Bologna – Italy
tel. +39 051 6960711 - fax +39 051 6960722
info@aprimatic.com - www.aprimatic.com
- 25 -

Notes for maintenance technicians

Tab. 4
Operation
Check the effi ciency of the photocells
and the electronic anti-crushing device.
Check that they are operating at the
values set by the installer.
Check the inside of the electronic
equipment housing and clean out any
insects, dirt or dampness.
Check that the optional emergency
batteries are working effi ciently (where
installed). Change spent batteries.
Check the effi ciency of the remote con-
trol batteries. Change spent batteries.
Remove branches, bushes or other
obstacles which might be permanently
blocking the photocell beam.
Test the effi ciency of the automatic dif-
ferential overload switch protecting the
electrical system.
Interval
... every 6
months
... every 6
months
... every 6
months
... every 6
months
... every 6
months
... every 6
months