Front Runner LASS026 Manual Del Usuario página 12

7 RACK ASSEMBLY- CORNERS
7.1
RACK ASSEMBLY - WIND DEFLECTOR
8
IN THE BOX
1 1 Slimline II Tray
2 4 M8 Half Nut
3 2 Wind Deflector (1LH + 1RH)
4 4 Schnorr Washer
5 4 M8 x 12 Button Head Bolt
FIGURE 1.2
RRSTUNI_REV_A04
6
2
10
4MM
TOOLS NEEDED
6
Flip the tray right side up.
Push the Corner into position as shown,
aligning the hole in the Corner with the
Rivnut already inserted in the Combined Slat.
Use a M6 x 12 Button Head Bolt (Item 10)
and fasten the Corner in position.
5mm
4 5
3
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
1