Front Runner LASS026 Manual Del Usuario página 38

installation OF LOAD BARS
Note: If you have not fitted the Universal Load Bed Tracks or Legs, please fit them as per the Universal
Load Bed Track and Universal Load Bed Led Fitting Instructions (Documents TRBU001 & LASS026).
( )
Slide an End Cap (Item 3) into the ends of
A
Track and secure in position using the
M3 x 6 Self Tapping Screw (Item 1).
( ) Fit a Plastic End Caps received with your Load Bars into each end of the Load Bars as shown.
B
( )
With the Load Bars in the upside down position (Check using
C
the Buck Logo on End Caps from Step 2B as an indicator),
slide two M8 x 25 Hex Bolts supplied with the Universal Load
Bed Legs into each end of the Load Bars using the machined
slots as shown.
TRBU001 / KRLBUNI1_REV_A01
5