Operating Instructions; Connect Clario Toni To Mains Power - Medela Clario Toni Instrucciones De Uso

7 Operating instructions

CAUTIONS
The Clario Toni is to be set up in such a way, that a separation from the mains supply
can be easily managed� Calibrate the rechargeable battery before the first use�
WARNINGS
For use only by medically trained persons who have been adequately trained in suction
procedures and in the use of aspirators� Wear gloves for all operations�
7.1
Connect Clario Toni
to mains power
1� Check the pump before use following the instruction in
chapter 6�1�
2� If the pump is connected
to a fixed mains socket:
or
If the pump is operated
with a 12 VDC power
source:
or
If the pump is operated
with the rechargeable
battery:
Plug in the mains plug of
the power cord to a fixed
mains socket�
Connect the optional
12 VDC connection cable
to the pump and to the
12 VDC power source�
No connection to a power
source is needed� Make
sure that the battery was
charged for five hours�
| 15
Operating instructions