Specifications - Stihl MS 460 Manual De Instrucciones

English / USA

Specifications

Engine
EPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category A = 300 hours, B = 125 hours,
C = 50 hours
STIHL single cylinder two-stroke
engine
Displacement: 4.67 cu.in
(76,5 cm
Bore: 2.05 in
(52 mm)
Stroke: 1.58 in
(40 mm)
Idle speed: 2,500 rpm
(2.500 1/min)
Ignition System
Type: Electronic
magneto ignition
Spark plug Bosch WSR 6 F,
(suppressed): NGK BPMR 7 A
Electrode gap: 0.02 in (0.5 mm)
58
Fuel/Oil System
Carburetor:
Air filter:
Fuel tank capacity:
Fuel mix:
Chain lubrication:
Oil tank capacity:
Weight
without bar and
3
chain:
)
Cutting Attachment
Recommended cutting attachments
for compliance with § 5.11 of ANSI
Standard B 175.1-2000
(see page 14 of this Manual):
STIHL reduced kickback bar
(with green label) for 3/8" pitch:
Rollomatic with sprocket nose
40, 45 or 50 cm (16, 18 or 20 in)
STIHL low kickback chain
(with green label) for 3/8" pitch:
9.32 mm (3/8") Rapid-Micro 2
(33 RM 2, 36 RM 2)
Chain sprocket:
7-tooth for 3/8" pitch spur sprocket
In order to comply with the kickback
performance requirements of § 5.11
All position
of ANSI Standard B 175.1-2000,
diaphragm
do not use replacement saw chain
carburetor with
unless it has been designated as
integral fuel pump
meeting the ANSI § 5.11 requirements
Filter insert
on this specific powerhead, or has been
(wire mesh)
designated as "low kickback" saw
1.69 US pt (0,8 l)
chain
See "Fuel"
175.1-2000 standard.
Fully automatic oil
Since new bar/chain combinations may
pump
be developed after publication of this
0.68 US pt (0.325 l)
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Other bars and chains available for this
powerhead are:
14.3 lb (6,5 kg)
STIHL yellow-labeled bars:
for 3/8" pitch:
Rollomatic "S" with sprocket nose
40, 45, 50, 63, 70, 75, 80 or 90 cm
(16, 18, 20, 24, 28, 30, 32 or 36 in)
Duromatic with stellite tipped nose
40, 45, 50 or 63 cm (16, 18, 20 or 24 in)
STIHL yellow -labeled chains:
for 3/8" pitch:
Rapid-Micro (33 RM, 36 RM, 33 RMF),
Rapid-Super (33 RS, 36 RS, 33 RSF,
36 RSF, 33 RSLK, 36 RSLK, 33 RSLFK,
36 RSLFK, 33 RSLHK, 36 RSLHK).
1)
Chain sprocket: 8-tooth 3/8" rim
sprocket
1)
1)
in accordance with the ANSI B
See definition of "low kickback
chain" on page 17.
MS 460, MS 460 C