Publicidad
8
If needed, switch levers.
Correct
No change necessary.
Incorrect
a.
b.
c.
Note location
of lever catch.
d.
Lever catch now on
other side of chassis.
e.
For the Keypad Exterior, insert the pin wrench
into the hole in the lever. Push in and hold.
Pull the lever off.
Repeat steps a and b to remove the lever from the Alarm
Interior.
Rotate the chassis so lever catch is on the other side. Then
use the lever from the Keypad Exterior to reassemble the
Alarm Interior.
Lever from Keypad
Exterior
Put the lever from the Alarm Interior on the Keypad
Exterior.
Lever from Alarm
Interior
Publicidad
