Connecting To A Wi-Fi Network - Honeywell Home Lyric T5 Wi-Fi Guia Del Usuario

Connecting to a Wi-Fi network

To configure and control your Lyric T5 Wi-Fi
thermostat remotely, the thermostat needs to be
connected to the Lyric app through your home's
Wi-Fi network. Follow the simple steps below to
get connected.
1 Make sure your smartphone or tablet is
connected to a 2.4 GHz Wi-Fi signal. (Many
Wi-Fi routers broadcast both a 2.4 GHz
signal and a 5.0 GHz signal. If given the
option, choose the 2.4 GHz signal.)
2 At the thermostat, press and hold the indoor
temperature in the center of the screen for
5 seconds until the screen changes.
3 Download the Lyric app from the App Store
or Google Play if you haven't already.
4 Open the Lyric app. Your thermostat should
appear under Thermostat Found. Tap SET UP
NOW to continue. If your thermostat doesn't
appear, tap INSTALL A DEVICE and follow the
prompts.
Wi-Fi connection status
The thermostat's Wi-Fi connection status is
located in the upper-right corner of the screen.
To troubleshoot Wi-Fi connectivity issues, see
the FAQs on page 30.
AM
Following Schedule
• Wi-Fi is connected
AM
Following Schedule Mode Fan
Heat Auto
• Wi-Fi is disconnected or Wi-Fi isn't set up
Mode Fan
Wake Away Home Sleep
• Wi-Fi is turned off Heat
Auto
Mode Menu Fan
Wake Away Home Sleep
Wifi is connected
Mode Menu Fan
Wifi is connected
Wifi is on and
connected
Following Schedule
Wifi is on and
Wifi is disconnected
connected
Mode
or wifi is not setup Heat
Wifi is disconnected
Wake Away Home Sleep
or wifi is not setup
Wifi is off
Mode Menu
Wifi is connected
Wifi is off
AM
Wifi is on and
connected
Fan
Auto
Wifi is disconnected
or wifi is not setup
Fan Wifi is off
10
AM
Following Schedule
Wake Away y Home Sleep
Menu e Fan
Lyric
AM
Following Schedule
Mode
Fan
Heat Auto
Wifi is disconnected
or wifi is not setup
Wake Away Home Sleep
Mode Menu Fan
Wifi is connected
Wifi is on and
connected
Wifi is off