Adjusting Backlight Brightness; Enabling/Disabling Smart Response - Honeywell Home Lyric T5 Wi-Fi Guia Del Usuario

Adjusting backlight brightness

When the thermostat is in idle mode, you can
adjust how bright you'd like the screen. You
can choose a brightness level from 01 (display
backlight is dimmest, which is the default) up to
05 (maximum brightness). To adjust backlight
brightness, follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the
BRIGHTNESS, then touch Select.
3 Touch or
which will change immediately.
Touch Done to confirm.
4

Enabling/disabling Smart Response

Over time, your Lyric T5 Wi-Fi thermostat will
learn how long it takes your system to reach the
desired temperature. It can then turn on your
heating or cooling equipment at the right time to
make sure your home is comfortable by the time
you expect. This feature is enabled by default. To
disable it, follow the steps below.
Touch Menu on the thermostat home screen.
1
2 Touch the
RECOVERY, then touch Select.
3 Touch the
RECOVERY ON or RECOVERY OFF, then
touch Done to confirm.
When Smart Response is active, you'll see the
recovery symbol in the upper-right corner of the
thermostat screen.
or arrows until you see
to adjust the brightness level,
or arrows until you see
or arrows to select
Back
Back
21
Done Cancel
Select
AM Recovery
Following Schedule
Mode Fan
Heat Auto
Wake Away Home Sleep
Mode Menu Fan
Done Cancel
Select
AM Recovery
Following Schedule
Mode Fan
Heat Auto
Wake Away Home Sleep
Mode Menu Fan
Recovery