Illumination Settings - Pioneer MVH-X3000BT Manual Del Usuario

ILLUMINATION settings

Menu Item
COLOR (Only for MVH-X3000BT)
[KEY COLOR], [DISP COLOR],
[BOTH COLOR]
DIM SETTING
[SYNC ILLUMI]*, [SYNC CLOCK],
[MANUAL]
* Only for MVH-X3000BT
BRIGHTNESS (Only for MVH-X3000BT)
[KEY], [DISP]
BRIGHTNESS (Only for MVH-S325BT)
[1] to [10]
PHONE COLOR (Only for MVH-X3000BT)
[FLASHING]
[FLASH FX1] to [FLASH FX6]
[OFF]
Description
Select color for the keys/display of the unit from
12 preset colors, [SCAN] or [CUSTOM]*.
• [SCAN]: Cycle through a variety of colors
automatically.
• [CUSTOM]*:
1 Press and hold the M.C. dial until the color
setting display appears.
2 Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 10 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C. dial until the color setting display appears.
* The CUSTOM setting is only available for [KEY
COLOR] and [DISP COLOR].
Select the way to change the display brightness.
Select the brightness for the keys/display of the
unit from [1] to [10].
The available setting ranges differ depending on
[DIM SETTING].
Change the display brightness.
The available setting ranges differ depending on
[DIM SETTING].
Select the key color when a call is received.
Applies the color set by [KEY COLOR].
• The illumination effect differs depending on
the selection of [ON] or [OFF] in [ILLUMI FX].
Cycle through a variety of colors automatically.
No change in key color made.
- 31 - - 31 -