Parts & Assembly - Nostalgia Products HDR8RY Instrucciones Y Recetas

PARTS & ASSEMBLY
ASSEMBLY
Your HOT DOG ROLLER requires very little assembly.
• Simply place Stainless Steel Rollers in the Base of the unit, making sure the pin fits
correctly into the hole on the left hand side of the Base interior. DO NOT force the
pin into the receptacle or it will strip and then Rollers will not work properly.
• Fit the four Canopy Poles into the holes in each corner of the Base.
• Insert the Drip Tray into the slot at the back of the unit.
• Attach the Canopy Top to the Canopy Poles.
Canopy Poles
Drip Tray (rear)
Base
DIAL POSITIONS
Left: Heat / Right: Power
5
Canopy Top
Stainless
Steel Rollers