Tabla De Contenido - Cequent Performance Products PRO Serie Manual De Instrucciones

Failure to follow these instructions may result in death or serious injury!
INDEX
1. GUIDELINES FOR MATCHING TOW VEHICLE AND TRAILER
2. ASSEMBLY INSTRUCTIONS
3. BEFORE EACH TRIP
4. HITCHING PROCEDURE
5. PULL TEST
6. UNHITCHING PROCEDURE
7. MAINTENANCE
8. CEQUENT PERFORMANCE PRODUCTS, INC. THREE YEAR LIMITED WARRANTY
GUIDELINES FOR MATCHING HITCH TRUCK AND TRAILER
Trailer and its contents together must not exceed truck, hitch and/or trailer tow
ratings.
Towing vehicle must have a manufacturer's rated towing capacity equal to or
greater than the gross trailer weight (dry weight of the trailer plus payload of the
trailer). (See Fig. 1)
Gross weight of trailer must not exceed 16,000 pounds.
King pin weight must not exceed 4000 pounds (See Fig. 2). If in doubt have king
pin weight measured by qualified facility.
Fig. 1
1. This hitch is designed for use with recreational fifth wheel trailers only. Hitch applications other than recreational
fifth wheel trailers must be approved in writing by Cequent Performance Product"s Engineering Department.
2. Use only a SAE 2-inch kingpin with this Fifth Wheel Hitch.
3. Approximately 15%-25% of trailer weight should be on hitch (Pin Weight). See Fig. 2.
Fig. 2
30854N 07/22/11A
FACTORY TRAILER + FULL WATER TANKS + CARGO, ETC.
15-25%
GROSS TRAILER
WEIGHT
(PIN WEIGHT)
PCN15500 ©2011 CEQUENT PERFORMANCE PRODUCTS, INC.
WARNING:
WARNING:
= GROSS TRAILER WEIGHT
GROSS TRAILER
GROSS TRAILER WEIGHT
P. 2
P. 4
P. 5
P. 5
P. 8
P. 8
P. 9
P. 9
75-85%
WEIGHT
PRINTED IN XXX
2