NOTE:
• Important: Once you switch on the appliance, the display remains switched off.
• The display brightness can be selected only when the appliance is switched off.
Delayed Switch-off
You can set the time after which the device will turn into standby mode; set the time
in 10 minutes intervals from 90 to 10 minutes. The device will turn off automatically
after the preset time.
1. Press the DIMMER / HIGH / LOW / OFF / SLEEP / SNOOZE button. The notifica-
tion "90" will appear in the display.
2. Press the button repeatedly to reduce the time in steps of 10. The "OFF" setting
disables the function and the device turns off.
NOTE:
• To call up the still remaining time, press the DIMMER / HIGH / LOW / OFF /
SLEEP / SNOOZE button briefly.
• For technical reasons, the activated function cannot be shown permanently on
the display.
1. Switch the device on.
2. Search for Radio Stations:
Briefly press the MIN / TU+ /
the radio station which you are looking for. Press and hold one of the two buttons
to search for the next or previous radio station respectively.
Preset Station: Keep the SET / PRE / M + button pressed for approx. 3 seconds.
Select a preset location with the buttons MIN / TU+ /
Press the SET / PRE / M + button once more. The station is preset.
NOTE:
If the reception is too weak and there is interference on the received station, try to
improve the reception by altering the position and uncoiling or coiling the antenna.
MRC7008_IM_CTC_IM
Radio Mode
/ HOUR / TU– /
buttons, until you have found
/ HOUR / TU– /
.
12.10.17
41