Clatronic MRC 7008 Manual De Instrucciones página 42

Select the Preset Radio Station
Repeatedly press the SET / PRE / M+ button. One pre-set location after the other will
be called up.
General Information
• You'd like to be woken up by radio? Preset the station and the volume. The device
switches on with the last set radio station and volume level.
• When the alarm time is reached, a dot flashes next to "AL 1 BUZZER" or "AL 1
RADIO" and / or "AL 2 BUZZER" or "AL 2 RADIO".
Setting of the Alarm
You can set two alarm times. Proceed as follows:
1. Switch the device off.
2. Press the AL1 / VOL– button. The indicator begins to flash.
3. Set the hours with the HOUR / TU– button and the minutes with the MIN / TU+
button.
NOTE:
If you do not press a button within 4 seconds, the settings are accepted auto-
matically.
4. Press the AL1 / VOL– button to store the alarm time. Then the current time is
displayed.
5. Then use the AL1 / VOL− button to select how you want to be woken up. Select
from:
• Buzzer ( AL 1 BUZZER ):
A buzzer sounds when the alarm time is reached. The volume of the buzzer
cannot be adjusted.
• Last heard radio frequency ( AL 1 RADIO ):
As soon as your set alarm time is shown, the radio switches on. The last tuned
FM station plays at the last set volume.
To set the second alarm time, repeat the above steps with the AL2 / VOL+ button.
NOTE:
• In case of an activated alarm time, a dot will light up at "AL 1 BUZZER /
AL 1 RADIO" and/or at "AL 2 BUZZER / AL 2 RADIO".
42
MRC7008_IM_CTC_IM
Alarm Function
12.10.17