To Clean And Protect Exterior Surfaces - Thermador Professional PCG24 Manual De Instalación

To Clean and Protect Exterior Surfaces

The stainless steel surfaces may be cleaned by wiping with
a damp soapy cloth. Any mild glass cleaner will remove
fingerprints and smears.
Follow all cleaning by rinsing with clear water. Wipe dry
with a clean soft cloth to avoid water marks. For
discolorations or deposits that persist, use a non-scratching
household cleanser or stainless steel polishing powder with
a little water and a soft cloth. For stubborn cases, use a
plastic scouring pad or soft bristle brush together with
cleanser and water. Rub lightly in direction of polishing
lines or "grain" of the stainless finish. Avoid using too much
pressure which may mar the surface.
English 16
Use a stainless steel cleaner/polish to protect the finish and
maintain appearance.
DO NOT allow deposits to remain for long periods of time.
DO NOT use ordinary steel wool or steel brushes. Small
bits of steel may adhere to the surface causing rust.
DO NOT allow salt solutions, disinfectants, bleaches or
cleaning compounds to remain in contact with stainless
steel for extended periods. Many of these compounds
contain chemicals which could prove harmful. Rinse with
water after exposure and wipe dry with a clean cloth.