Canon imageCLASS D1650 Introducción página 32

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Appendix
Do not touch the contacts ( 
machine. Doing so may result in damage to
the machine.
When transporting the machine
To prevent damage to the machine during
transport, perform the following.
Remove the toner cartridge.
Securely pack the machine in the original box
with packing materials.
Safety-Related Symbols
Power switch: "ON" position
Power switch: "OFF" position
Power switch: "STAND-BY" position
Push-push switch
Protective earthing terminal
Dangerous voltage inside. Do not open
covers other than instructed.
CAUTION: Hot surface. Do not touch.
Class II equipment
Moving parts: Keep body parts away from
moving parts
CAUTION: An electrical shock may occur.
Remove all the power plugs from the power
outlet.
There are sharp edges. Keep body parts
away from sharp edges.
En
[NOTE]
Some of symbols shown above may not be
affixed depending on the product.
Maintenance and Inspections
Clean this machine periodically. If dust
accumulates, the machine may not operate
properly. When cleaning, be sure to observe the
following. If a problem occurs during operation,
see "Troubleshooting" in the User's Guide. If the
problem cannot be resolved or you feel the
machine requires an inspection, see "When a
Problem Cannot Be Solved."
WARNING
Before cleaning, turn OFF the power and
unplug the power plug from the AC power
outlet. Failure to do so may result in a fire or
electrical shock.
32
  ) inside the
Unplug the power plug periodically and clean
with a dry cloth to remove dust and grime.
Accumulated dust may absorb humidity in the
air and may result in a fire if it comes into
contact with electricity.
Use a damp, well wrung-out cloth to clean the
machine. Dampen cleaning cloths with water
only. Do not use alcohol, benzine, paint
thinner, or other flammable substances. Do
not use tissue paper or paper towels. If these
substances come into contact with electrical
parts inside the machine, they may generate
static electricity or result in a fire or electrical
shock.
Check the power cord and plug periodically
for damage. Check the machine for rust, dents,
scratches, cracks, or excessive heat generation.
Use of poorly-maintained equipment may
result in a fire or electrical shock.
CAUTION
The inside of the machine has high-
temperature and high-voltage components.
Touching these components may result in
a
burns. Do not touch any part of the machine
that is not indicated in the manual.
When loading paper or removing jammed
paper, be careful not to cut your hands with
the edges of the paper.
Consumables
WARNING
Do not dispose of used toner cartridges or the
like in open flames. Also, do not store toner
cartridges or paper in a location exposed to
open flames. This may cause the toner to
ignite, and result in burns or fire.
If you accidentally spill or scatter toner,
carefully gather the toner particles together or
wipe them up with a soft, damp cloth in a way
that prevents inhalation. Never use a vacuum
cleaner that does not have safeguards against
"ON"
"OFF"
dust explosions to clean up spilled toner.
Doing so may cause a malfunction in the
vacuum cleaner, or result in a dust explosion
due to static discharge.
If you are using a cardiac pacemaker
The toner cartridge generates a low level
magnetic flux. If you are using a cardiac
pacemaker and feel abnormalities, please
move away from the toner cartridge and
consult your physician immediately.
CAUTION
Use caution not to inhale any toner. If you
should inhale toner, consult a physician
immediately.
Use caution so that toner does not get into
your eyes or mouth. If toner should get into
your eyes or mouth, immediately wash with
cold water and consult a physician.
Use caution so that toner does not come into
contact with your skin. If it should, wash with
soap and cold water. If there is any irritation on
your skin, consult a physician immediately.
Keep the toner cartridges and other
consumables out of the reach of small
children. If toner is ingested, consult a
physician or poison control center
immediately.
Do not disassemble or modify the toner
cartridge or the like. Doing so may cause the
toner to scatter.
When removing the sealing tape from the
toner cartridge, pull it out completely but
without using excessive force. Doing otherwise
may cause the toner to scatter.
IMPORTANT
Handling the toner cartridge
Be sure to hold the toner cartridge using the
handle.
Do not touch the toner cartridge memory
  ) or the electrical contacts ( 
scratching the surface of the drum inside the
machine or exposing it to light, do not open
the drum protective shutter ( 
a
c
b
Except when necessary, do not take out the
toner cartridge from the packing material or
from this machine.
The toner cartridge is a magnetic product. Do
not move it close to products susceptible to
magnetism including floppy disks and disk
drives. Doing so may result in data corruption.
Storing the toner cartridge
Store in the following environment to ensure
safe and satisfactory use.
Storage temperature range: 32 to 95°F (0 to 35°C)
Storage humidity range: 35 to 85% RH (relative
humidity/no condensation)*
Store without opening until the toner
cartridge is to be used.
When removing the toner cartridge from this
machine for storage, place the removed toner
cartridge in the original packing material.
When storing the toner cartridge, do not store
it upright or upside down. The toner will
solidify and may not return to its original
condition even if it is shaken.
* Even within the storable humidity range,
water droplets (condensation) may develop
inside the toner cartridge if there is a
difference of temperature inside and outside
the toner cartridge. Condensation will
adversely affect the print quality of toner
cartridges.
Do not store the toner cartridge in the
following locations
Locations exposed to open flames
Locations exposed to direct sunlight or bright
light for five minutes or more
Locations exposed to excessive salty air
Locations where there are corrosive gases (i.e.
aerosol sprays and ammonia)
Locations subject to high temperature and
high humidity
Locations subject to dramatic changes in
temperature and humidity where
condensation may easily occur
  ). To avoid
  ).
Bottom View

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Imageclass d1620

Tabla de contenido