Panasonic CW-XC100HU Instrucciones De Instalación Y Funcionamiento página 6

Remote controller
Precaution:
The Remote Controller will not function properly if strong light strikes the sensor window of the
air conditioner or if there are obstacles between the Remote Controller and the air conditioner.
OPERATION
• To turn the air conditioner ON, push the button.
To turn the air conditioner OFF, push the button
again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on
the High cool mode and the temp. at 72°F(22˚C).
MODE
• Every time you push this botton,it will toggle
between COOL, FAN and DRY.
ON/OFF TIMER
- STOPPING OPERATION
• Every time you push this button, when the air
conditioner is operating, timer is set as follows.
(1Hour 2Hours 3Hours
6Hours 7Hours 8Hours
10Hours 11Hours 12Hours
• The Setting Temperature will be raised by
2°F (1°C) 30 min. later and by 2°F (1°C) after
another 30 min.
Models: CW-XC100HU, CW-XC120HU
OPERATION
1
TEMP
TIMER
3
MODE
2
4Hours 5Hours
9Hours
O).
6
5
FAN SPEED
4
- STARTING OPERATION
• Every time you push this button, when the air
conditioner is not operating, timer is set as follows.
(1Hour 2Hours 3Hours
6Hours 7Hours 8Hours
10Hours 11Hours 12Hours
FAN SPEED
• Every time you push this button it is set as follows.
{High(F3) Low(F1) Med(F2)
TEMPERATURE SETTING
• This button can automatically control the
temperature of the room.
The temperature can be set within a range of 60°F
to 86°F by 1°F(16˚C to 30˚C by 1˚C). Select the
lower number for lower temperature of the room.
4Hours 5Hours
9Hours
O)
High(F3)...}.