Makita DMR108 Manual De Instrucciones página 11

Snooze
1. When the alarm sounds, press any button other than
the Power button
5 minutes. "SNOOZE" will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Menu/Info button
setting.
3. Rotate the Tuning control knob
appears on the display, then press the Tuning control
knob to enter the setting. Rotate the Tuning control
knob to adjust the silence time from 5, 10, 15 and
20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is
suspended, press the Power button
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 60, 45, 30, 15, 120 and 90 minutes.
1. Press and hold the Power button
Sleep Timer setting. "SLEEP XX" will show on the
display.
2. Keep holding the Power button
Timer options will start switching on the display. Stop
until the desired Sleep Timer setting appears on the
display. The setting will be saved and the LCD will
return to normal display.
3. Your radio will switch off automatically after the preset
Sleep Timer has elapsed. The Sleep Timer icon
will show on the display indicating an active Sleep
Timer.
4. To cancel the Sleep Timer function before the preset
time has elapsed, simply press the Power button
to turn the unit off manually.
Loudness
You can get compensation on lower and higher frequency
for your radio by adjusting the loudness function.
1. Press and hold the Menu/Info button
menu setting.
2. Rotate the Tuning control knob
"LOUD OFF" appears on the display. Press the Tuning
control knob to enter the setting.
3. Rotate the Tuning control knob
turn on the loudness function, then press the Tuning
control knob to confirm the setting.
4. To turn off the loudness function, select OFF and
press the Tuning control knob
setting.
will silence the alarm for
to enter the menu
until "SNOOZE X"
.
to enter the
and the Sleep
to enter the
until "LOUD ON" or
to choose ON to
to confirm the
Auxiliary input socket
Two 3.5 mm stereo Auxiliary Input sockets are provided.
One is at the front of your radio (AUX IN 1); the other is
located in the battery compartment (AUX IN 2).
1. Connect an external audio source (for example, iPod,
MP3 or CD player) to the Auxiliary Input socket.
2. Repeatedly press and release the Source button
until AUX IN 1or 2 is displayed.
3. Adjust the volume setting on your iPod, MP3 or CD
player to ensure an adequate signal level from the
player, and then use the Tuning control knob
radio as needed for comfortable listening.
Listening to Bluetooth
You need to pair your Bluetooth
before you can auto-link to play/stream Bluetooth
through your radio. Paring creates a permanent "bond" so
two devices can always recognize each other.
Pairing your Bluetooth
1. Press the Source button
function. "BT READY" will be shown on the display
and "READY" will flash with every 2 seconds interval.
®
2. Activate Bluetooth
device's user manual to allow the paring procedure.
3. Press and release the Pair button
will be shown on the display and it will flash with
1 second interval. You can start the search of your
radio on your Bluetooth
your radio is appeared on your Bluetooth
press the item in your Bluetooth
With some old type mobiles (versions earlier than
®
BT2.1 Bluetooth device), you may need to input the
pass code "0000".
®
4. Your Bluetooth device will be linked with the radio.
5. Once connected, "BLUETOOTH" will remain on the
display and the backlight will be dim-out in
10 seconds.
You can now play the music in your Bluetooth
device via your radio.
Playing Bluetooth
already paired
1. Press the Source button
function. "BT READY" will be shown on the display
and "READY" will flash with every 2 seconds interval.
2. Search and link the radio on your Bluetooth
Some device may link with the radio automatically.
You can now play the music in your Bluetooth
device via your radio.
Note:
a) The radio can pair with 8 Bluetooth
When you pair Bluetooth
number, pairing history will be overwritten from the
oldest pairing history.
® music
®
device with your radio
®
device
to select Bluetooth
on your device according to the
, then "BT PAIR"
®
device. Once the name of
®
device,
®
list.
®
-enabled
®
device which has
to select Bluetooth
®
®
-enabled
®
devices at most.
®
devices more than this
on the
®
music
®
®
device.
11