Bushnell TOUR Z6 JOLT Manual De Instrucciones página 9

PINSEEKER WITH SLOPE +/-
™ ™
The advanced patented SLOPE mode is available only on model 201441. This model features a built-in accelerometer-
based inclinometer that digitally displays the exact slope angle from -20 to +20 degrees of elevation and is +/- 1.0 degree
accurate. The Slope +/-™ mode will automatically compute an angle compensated range based upon distance and slope
angle determined by the laser rangefinder and built-in inclinometer. This data is then combined with internal algorithmic
formulas dealing with average club use and ball trajectories. The angle compensated range provides direction on how to
play the shot (i.e. add distance if an incline, subtract distance if a decline).
ACTIVATING SLOPE MODE
(Model 201441 only)
The Tour® Z6™ Jolt Slope +/-™ was especially designed with golfers in mind. The SLOPE mode allows you to display the
angle and "Play-As" distance. To activate or deactivate this mode, press the POWER button once to turn the unit ON.
Then while looking through the eyepiece, press the MODE button and quickly release.
HOW TO USE SLOPE +/-
™
Once in this mode, you will see a " ° " in the field of view informing you that you are in the Slope +/- Mode. Press
the POWER button to obtain distance to the flag or other objects. Once the range is displayed, continue to hold the
POWER button down for approximately 2 seconds while holding the aiming circle on the flag and keeping the unit
as steady as possible so as to allow the inclinometer enough time to measure slope. Then release the POWER button.
Once you have released the power button, a degree of angle and compensated range will be displayed beneath the
standard distance as seen below.
In this example, the true distance is 162 yards, slope is +4 degrees, and the compensated range is 173 yards. The " "
symbol means "Play-As", so instead of playing as 162 yards, "play-as" 173 yards.
9