Tabla de contenido
Publicidad
MAINTENANCE
Battery
must be recharged.
Jumper Cable Use
1.
care not to short against chassis.
2. Connect one end of the BLACK cable to the
3. Connect the other end of the BLACK cable
to a good CHASSIS GROUND on the mower
To remove cables, reverse order
1.
2.
CAUTION!
around batteries.
IMPORTANT INFORMATION
•
•
• See chart for charging times.
24
OF
50 Amps
30 Amps
20 Amps
100%
75%
20 min.
35 min.
48 min.
50%
45 min.
75 min.
95 min.
25%
65 min.
115 min.
145 min.
0%
85 min.
150 min.
195 min.
Cleaning the battery and terminals
1.
2. Loosen the two wing nuts attached to the side
3.
4.
5.
6.
7. Coat the terminals with grease or petroleum
Replacing
1.
2.
3. Connect BLACK grounding cable to negative
4.
retighten wing nuts.
CAUTION!
protection when around batteries.
OPERACIÓN
F
O
debe levantarse a la posición de transporte.
10 Amps
•
90 min.
180 min.
componentes eléctricos.
•
280 min.
370 min.
frecuente.
61
Publicidad
Tabla de contenido
