Tabla de contenido
Publicidad
DATOS TÉCNICOS
Fabricante
Lubricación
Combustible
Capacidad del depósito de combustible
Refrigeración
Filtro de aire
Alternador
Control de la dirección
Frenos
Ancho de corte
Altura de corte
Longitud de la cuchilla
Rodillo de nariz
Reposabrazos con bisagras
Acoplamiento de la cuchilla
Productividad
Peso
Ancho total, tolva arriba
Ancho total, tolva abajo
Altura total, ROPS arriba
76
Briggs & Stratton
1)
26 hp
18,9 litros
Refrigerado por aire
Palancas dobles, sujeción de espuma
133 cm
3
46 cm
Digital
Fabricado con calibre 11
2
16,997 m
/h
1)
declarada por el fabricante
del motor es la potencia
192 cm
bruta de salida promedio
107 cm
un motor de producción
125 cm
típico para el modelo de
135 cm
motor que se mide con las
normas SAE para potencia
170 cm
bruta del motor. Consulte las
184 cm
del fabricante.
SAFETY
•
roll over if a wheel is over the edge or the edge
caves in.
WARNING! Do not drive up or down hills
with slopes greater than 10 degrees. Do not
drive across slopes.
Safe Handling of Gasoline
WARNING!
much more care in handling gasoline. Gasoline is
•
other sources of ignition.
•
• Do not remove gas cap or add fuel with
the engine running. Let engine cool before
refueling.
• Do not fuel the machine indoors.
•
such as on a water heater or other appliance.
•
refueling, minimize
touching a metal
surface.
•
inside a vehicle or
•
•
or trailer and refuel it on the ground. If this is not
container, rather than from a gasoline dispenser
nozzle.
• Keep the nozzle in contact with the rim of the
open device.
• If fuel is spilled on clothing, change clothing
• Do not start the engine near spilled fuel.
• Do not use gasoline as a cleaning agent.
•
not be started until problem has been resolved.
•
General Maintenance
• Do not use the machine indoors or in spaces
poisonous lethal gas.
•
those fastening the blade attachments, are
CAUTION! Use protective glasses
•
• Do not interfere
with the intended
device or reduce the
protection provided
•
manufacturer's recommended parts when
WARNING!
belt is removed.
• Do not change the settings of governors and
machine components could be damaged.
•
grass, leaves or other debris buildup. Clean oil
machine cool before storing.
9
Publicidad
Tabla de contenido
