Dremel 100 Instrucciones De Funcionamiento Y Seguridad página 21

DM 2610029870 12-12_DM 2610029870 12-12.qxp 12/12/12 2:33 PM Page 21
* Speed for light cuts; Caution - burning on deep grooves.
• Depending on cutting direction relative to grain.
Not all speed settings can be achieved on 100 and 200 series tool. For certain applications,
a variable speed tool is required.
2 = 5,000 - 8,000 RPM's
6 = 16,000 - 21,000 RPMʼs
Catalog Soft
Number Wood
453, 454, 455 -
Catalog Soft
Number Wood
409, 420, 426 -
540, EZ409
543, EZ544 10
545, EZ545 8-10
560 For use on drywall. For best results, use at 30,000 rpm.
561 6-10
562 -
EZ456 -
EZ476 -
Catalog Soft
Number Wood
461, 462, 463 -
414, 422, 429 -
425, 427 -
423E -
Catalog Soft
Number Wood
403, 404, 405 4
428, 442, 443 4
530, 531, 532 -
535, 536, 537 4
Catalog Soft
Number Wood
430, 431, 438 2-10
439, 440, 444 2-10
407, 408, 432 2-10
411, 412, 413 6
Speed Settings (Continued)
4 = 9,000 - 15,000 RPM's
8 = 22,000 - 27,000 RPMʼs
Chain Saw Sharpening Stones
Hard Laminates Steel Aluminum,
Wood /Plastic Brass, etc.
- - 10
Cutting Accessories
Hard Laminates Steel Aluminum,
Wood /Plastic Brass, etc.
- 2-4 10
8-10 2-4 -
8 - -
6-10 2-4 -
- - -
- - 10
- 2-4 -
Polishing Accessories
Hard Laminates Steel Aluminum,
Wood /Plastic Brass, etc.
- - 8
- - 6
- - 8
- - 6-8
Wire Brushes
Hard Laminates Steel Aluminum,
Wood /Plastic Brass, etc.
4 2-4 6
4 2 4
4 - 4
4 - 4
Sanding Bands and Discs
Hard Laminates Steel Aluminum,
Wood /Plastic Brass, etc.
2-10 2-6 10
2-10 2-6 10
2-10 2-6 10
6 2 -
21
DV-2610029870, Page: MUL (VAA), downloaded at: 2016.04.12_17:39:53, by PT-RT/MKB2_Nicole.Hayden
10 = 28,000 - 32,000 RPMʼs
Shell/ Ceramic Glass
Stone
- - - -
Shell/ Ceramic Glass
Stone
10 10 10 -
- - -
- 6-8 6-8 -
10 - - -
- - 10
10 - - -
- - - -
Shell/ Ceramic Glass
Stone
8 8 8 8
6 6 6 6
8 - - -
2 2 2 6-8
Shell/ Ceramic Glass
Stone
2 - - -
4 - - -
- - - -
4 4 - -
Shell/ Ceramic Glass
Stone
10 2-10 2-10 -
10 2-10 2-10 -
10 2-10 2-10 -
2 - - -