Opening / Closing Door; Activation After Selecting The Programme; Quick Start - CASO DESIGN SMG20 Manual Del Usuario

Kitchen roll
Metal sheet
Metal rack
Aluminium foil and container

13.4 Opening / closing door

 Open door
Push the door opener to open the door of the device. If the device is
switched on, the current cooking programme will be interrupted.
Please note
► Leave the door open for a moment before reaching into the cooking chamber, to allow
the accumulated heat to escape.
 Close doors
Close the door until the door latch audibly locks in place. If a current
cooking programme was interrupted as a result of opening the door, the
current cooking programme will be continued after pressing the button
START.

13.5 Activation after selecting the programme

After selecting the program, press START to start the preset cooking
programme.

13.6 Quick start

1) Quick start of the microwave: You can start the mircowave diectly with
full power for any period of time.
Use
the microwave on full power.
2) Press START in standby mode to heat food at full power for 30
seconds. Press START again to increase the time by 30 seconds
which each pressing, the maximum is 95 minutes.
3) In all microwave, grill, defrost and combination programmes it is
possible to increase the time in 30 second increments by pressing
START (repeatedly) also after a programme has been selected and
confirmed.
Attention: This function is not available for the defrosting (by weight) and the automatic
cooking programmes.
caso SMG20
 
 
 
 
to set the time and then press START directly to start




58